Saturday, November 28, 2009

Acorn Snowman Ornament craft

Now is the time, before the snow flies, to get outside and gather up some acorns for craft projects. Only take what you will use, leave the rest for the squirrels! :)

This little snowman ornament is a simple craft that kids can help make. There are some small details, so your guiding hand will be at work here. Once completed, this little acorn snowman makes a perfect gift topper, tree ornament, gift for a teacher, aunt, grandma or even a good friend. So let's get started!


Acorn Snowman
(I originally made this a few years ago for FamilyCorner.com)

What You Need

3 acorns for each snowman
1 acorn top for each snowman
acrylic paint in white and red
purchased miniature bow or ribbon
8" thin ribbon
snow texture paint
black marker or paint
orange acrylic paint
toothpick
sandpaper
hot glue

What you do

Gently rough up the outside of each acorn with a piece of sandpaper. Paint acorns white, 2 or 3 coats may be needed to cover. Paint the acorn top with red paint, repeat and let dry.

Glue each acorn together with hot glue. Hot glue acorn top on as a hat. Use black marker, or a toothpick dipped in black paint, to dot on eyes, mouth and buttons. Use the other end of the toothpick to paint on nose with orange paint.

Glue the bow tie, or ribbon fashioned into a bow tie, to the front of the snowman. Glue the thin piece of ribbon to the back of the snowman as a hanger. When everything is dry, hang the snowman on a nail on the wall. Now using the snow texture paint, add some snow to the hat. Allow to dry completely.

I have linked this to the Friday Showcase, check out what some other crafters did!

Printer friendly version (text only)

Tuesday, November 24, 2009

Light Bulb Turkey


I made this turkey light bulb several years ago for FamilyCorner.com. I really love the way he came out! At one point I was kind of on a kick with light bulb ornaments, you'll see that in the coming days as I post my snowman, penguin and angel ornies. Painting on light bulbs isn't hard, the trick is the make sure each layer of paint is completely dry before you start the next to avoid inadvertently peeling off the layer before.

There's a printable version of these instructions here.


You will need

burnt out light bulb
small straw hat
2- 1 1/2" wood hearts
acrylic paint: brown, orange, white and black
felt: red and orange
small silk flower
6-8 fall colored feathers
washer
paint brush
acrylic sealer spray
hot glue gun
white craft glue
pattern

What you do

Place light bulb on an empty upside down egg carton or anything else that will help hold it steady. Paint the entire surface of the light bulb with brown paint. Let this coat dry COMPLETELY or you may experience peeling on the second coat.

Paint the wood hearts with orange paint and let dry. Repeat for second coat. Using the pattern, cut out turkey waddle from red felt and beak from orange felt.

Hot glue small silk flower to the front of the straw hat, off to the side.

Add a second coat (and a third if needed) of brown paint to the light bulb. Let dry.

Glue the two hearts together at the sides, just above the points so that they form the feet. Use white craft glue to attach the washer to the hearts, this is what the light bulb will rest on. White craft glue is tackier and will hold better than hot glue for this purpose. (see photo)

Position the light bulb on to the washer. When you have it where you want it, glue it in place with white craft glue and let dry.

Hot glue the hat to the top of the light bulb. Use the handle end of the paint brush to add whites of eyes. Do not add the black part of the eyes until the white has dried.

Glue the beak and waddle below the eyes.

Hot glue feathers to the back of the light bulb in a fan for the tail.

Check out the other crafty posts at Today's Creative Blog round up

Have a Happy Thanksgiving!

Friday, November 20, 2009

Clay Pot Pilgrim craft


This is so easy. I made this several years ago for FamilyCorner.com. It can be made by kids and adults with minimal supplies. Nothing fancy, just a clay pot, a little paint, and some felt and you have yourself a project! She's really cute and looks great sitting on your Thanksgiving table :)

You will need

2 1/4" terra cotta pot
1 1/2" diameter wooden ball
felt: white and brown
acrylic paint: gray, flesh, black and pink
thin white ribbon
hot glue gun
scissors
paintbrush
black marker
scruffy brush or roughed up cotton swab
patterns

What you do

Paint clay pot gray and let dry. Paint a second coat and let dry completely.

Paint the wooden ball with flesh colored paint and let dry. Paint a second coat and let dry completely.

Using the patterns, cut out hair from brown felt and collar and bonnet from white felt.

When paint is dry, spray entire surface of pot with acrylic sealer.

Position the collar on top of the inverted clay pot. Hot glue the collar to the pot and use white craft glue to attach the ball to the collar. This will take some time to dry but will adhere much better than hot glue.

When the glue has dried, use a scruffy brush or roughed up cotton swab and a small amount of pink paint to add the cheeks. Be sure to dab off excess paint before adding cheeks, use a dry application. Use the black marker to dot on eyes.

Position the hair onto the wooden ball so that it frames the face. If you need to, felt stretches if pulled gently. Be careful not to rip it. Once in position, glue in place.

Position the bonnet on top of the head, centering it, tack in place with a dot or two of hot glue. Position the bonnet in place along the sides of the head, tack down in back and on sides with hot glue gun. Tie ribbon into a small bow. Trim the ends and hot glue to the center of the collar at the point.

For a text only (no craft photos or commentary) printer friendly version of this craft project, click here

Thursday, November 12, 2009

Cardboard Tube Pilgrims & Indians craft


I made these little cuties a last year for FamilyCorner.com. Aren't they cute?? They are one of my faves for Thanksgiving, and the bonus is that it's a recycling project. While I was making these, my son made an indian right along side me.

These are kid friendly and you can adjust the details to make them more age appropriate if needed. The tutorials for each one are below:

Cardboard Tube Pilgrims and Indians
Printable version here

You will need

1 paper towel roll cardboard tube
2 small feathers
2 pink miniature pom poms
1 brown miniature pom poms
13-15 yellow miniature pom poms
3 red small pom poms
acrylic paint: brown, flesh, light brown, white, black and pink
black fine tip marker
felt: tan, brown, gray, white, black, orange, peach, and green
scissors
hot glue gun
white craft glue
paintbrush
patterns


What you do

First, cut the paper towel roll into three sections, one for each character.

Pilgrim Man 
Paint the top 1/3 of the cardboard tube with flesh colored paint. Use brown paint to add on hair around the back and sides of face. Leave enough room to add facial features later. Let dry before continuing.

Roll up tube in a piece of brown felt. Trim felt to the height of the roll and be sure you have enough to wrap all the way around it as well, overlapping slightly.

Cut the felt strip about 2/3 of the way up for the pilgrim's clothes, leaving the remainder for his hat. Glue the larger brown piece of felt around the tube for his clothes and the smaller section around the top for his hat. Glue seams in the back.

Cut out hat brim from brown felt and hat band from black felt using the patterns. Cut out the buckles from black and white felt according to the pattern. Glue the hand brim around the bottom of the hat and the black band above the brim. Glue the buckle (white first, then black) onto the front of the hat on the band.

Cut out the pilgrim's collar from the white felt using the pattern. Glue around the neckline on top of the brown felt.

Cut out pumpkin and stem from orange and green felt, glue to the front of the pilgrim's body. Cut out 2 hands from peach felt and glue to the front, overlapping the sides of the pumpkin.

Use the handle end of a paint brush dipped in white paint to dot on eyes. Do not add black until white is dry. Use a scruffy paint brush or a roughed up cotton swab to add cheeks using pink paint. Be sure to dab off excess pink paint before applying cheeks (dry application). Glue a miniature pink pom pom on for the nose and use fine tip black marker to add the mouth and eyebrows. Dot on blacks of the eyes.

Pilgrim Woman
Paint the top 1/3 of the cardboard tube with flesh colored paint. Use light brown paint to add on hair around the back and sides of face. Leave enough room to add facial features later. Let dry before continuing.

Roll up tube in a piece of gray felt. Trim felt to 2/3 the height of the roll and be sure you have enough to wrap all the way around it as well, overlapping slightly.

Glue the gray felt around the tube for her clothes, seam should be in the back.

Cut out the pilgrim woman's collar from the white felt using the pattern. Glue around the neckline on top of the gray felt.

Cut a piece of white felt wide enough to cover the top of the tube and hang down about 1" in the back. The shape will resemble a semi-circle, adjust and trim as needed to make her bonnet.

Cut out basket from tan felt and 2 hands from peach felt using pattern. Glue basket to the front of the pilgrim woman and glue hands on, overlapping the sides of the basket. Glue 3 small red pom poms to the top of basket for apples.

Use the handle end of a paint brush dipped in white paint to dot on eyes. Do not add black until white is dry. Use a scruffy paint brush or a roughed up cotton swab to add cheeks using pink paint. Be sure to dab off excess pink paint before applying cheeks (dry application). Glue a miniature pink pom pom on for the nose and use fine tip black marker to add the mouth, eyebrows and eyelashes. Dot on blacks of the eyes.

Indian 
Paint the top 1/3 of the cardboard tube with brown paint.

Roll up tube in a piece of tan felt. Trim felt to 2/3 the height of the roll and be sure you have enough to wrap all the way around it as well, overlapping slightly. From the remainder of the felt, cut out a thin strip of tan to use as the headband, set aside for a later step.

Glue the tan felt around the tube for his clothes, seam should be in the back.

Cut a piece of black felt wide enough to cover the top of the tube and long enough to reach the bottom of both sides of the tube. Use hot glue to attach the hair to the top of the tube. Dot a bit of glue at the tops of the sides as well, but not all the way down, just to hold it in place. Cut the hair on both sides into three pieces and braid together. Hot glue the braided ends and glue to the side of the tube.

Glue two feathers to the side of the head, then wrap headband around the head, seam in the back and glue in place.

Cut out the corn husk and leaf from green felt and 2 hands from brown felt using the pattern. Glue the large green husk to the front of the Indian. Glue on two rows of miniature yellow pom poms for the corn kernels, then glue the green leaf at the bottom of the kernels, overlapping them slightly. Glue the hands on, overlapping the corn.

Use the handle end of a paint brush dipped in white paint to dot on eyes. Do not add black until white is dry. Use a scruffy paint brush or a roughed up cotton swab to add cheeks using pink paint. Be sure to dab off excess pink paint before applying cheeks (dry application). Glue a miniature brown pom pom on for the nose and use fine tip black marker to add the mouth and eyebrows. Dot on blacks of the eyes.

This project has been added to We Made it Friday Showcase and to Categorically Crafting at Someday Crafts. See what else has been made!


Thursday, November 5, 2009

Thanksgiving Tree Craft for Kids

My kids and I made this Thanksgiving Tree so many years ago that I can't even remember when it was. I posted it on FamilyCorner.com immediately afterward and it continues to be one of the most popular Thanksgiving crafts (especially for younger kids) on the site.

To make your own Thanksgiving Tree you will need the following:

Materials

sheet of white poster board
pencil
tempera paint, markers or crayons
construction paper in red, yellow, green and orange
markers
scissors
glue or tape
glitter glue (optional)

Variation: This project can also be easily adapted to a cork board (see photo) by simply using colored push pins to match the leaves. Use brown construction paper to make the tree trunk.

You may draw the tree trunk freehand or print out our template

At the top of the posterboard, entitle your tree "Smith Kids Thanksgiving Tree", inserting your family surname in the title.

With a pencil on poster board, draw a basic tree with a branch for each child in the family. If you only have 1-2 children, it might be fun to include two or three branches for each child.

Using tempera paint, markers, or crayons color the tree trunk brown. On red, orange, green and yellow construction paper, trace 10 copies of each child's hand. Cut out and give each child their "leaves".

Each child writes one thing that they are thankful for on each leaf (grown ups can help if needed!). You may decorate the leaves with glitter glue if you like. Next, tape or glue the leaves onto their designated branches.

This makes a great activity to keep kids happy during a large family gathering. Hint: Make the base ahead of time for quick start up.

Hang up the Thanksgiving Tree where the whole family can see it. Makes a great conversation piece! Later, after dinner, have the children present their tree to the family gathered around. Each child tells what they are thankful for and why.

For added fun, make additional posterboard bases up ahead of time so that the rest of the family can add their leaves as well. Have supplies at the ready!

Originally posted on FamilyCorner.com
This was entered into We Made It 

For a text only (no craft photos or commentary) printer friendly version of this craft project, click here

Tuesday, November 3, 2009

Make a Turkey from a Glove for Thanksgiving

Now that Halloween has passed, I was going through some of the Thanksgiving crafts I have made over the years for FamilyCorner.com. One of my all time favorites has to be the stuffed glove turkey I made three years ago. I always keep stock of those cheap knit gloves, and usually buy gobs of them each winter. My kids go through them like water, so I always have several pairs on hand. Quite often I end up with several mismatched pairs, which I in turn I save to make something.

This brown glove, however, didn't lose its mate. Instead, the second glove in the pair had a huge hole in it. So I salvaged some scraps from the second glove and came up with this stuffed turkey glove. I still bring him out every year at Thanksgiving and he sits proudly on our table. This is one turkey that will never hit the oven. ;)

You will need

2 brown knit gloves
berries from silk plant
3" wooden heart
acrylic paint: white, black, and orange
felt: goldenrod, red, tan, and white
Poly batting stuffing
scissors
paintbrush
hot glue gun
rubber band
patterns

What you do

Stuff one of the gloves with poly batting, fill the fingers and half of the palm.

Cut the four fingers off the second glove, leave the thumb intact. Set the finger pieces aside for a later step. Hot glue the finger openings closed. Stuff the thumb and half of the palm with poly batting.

Paint the wooden heart orange and set aside to dry.

Insert the glove with only the thumb inside the fully intact glove. The thumb should be sticking out for the head of the turkey. You will need to manuever the poly batting around until you have a plump body, add more poly batting if needed. The fingers (tail) will be sticking straight out.

Once you have the body stuffed and plumped, and the thumb is sticking out, you will need to raise the fingers (tail) up so that the are stuck to the body and stand up. To do this, cup the turkey in your hand and press the stuffed fingers towards the body, like you are cupping a ball in your hand. Apply some hot glue at the bends in the fingers so that they will stick to the body of the glove. Wrap a rubber band around the turkey so that the fingers will have time to dry. Set aside.

While that is setting up, build the wreath around the neck, which should be the wrist cuff of the outer glove. Hot glue silk or plastic berries around the neck to form a festive wreath.

Glue the body to the orange heart (feet), rounded ends of the heart should be at the front of the turkey.

Take two of the cut fingers that you set aside earlier, these will be the wings. Fold in half, tack with hot glue to keep folded. Glue cut edge to the side of the turkey so that the rounded end of the cut finger is showing on the outside. Repeat on the other side. Save the other two fingers for scrap material on another project.

To add facial features, begin by gluing on the whites of the eyes. Use the handle end of a paintbrush to add blacks of eyes. Next add the eye brows, then the waddle and lastly the beak. Finally, dot white onto blacks of the eyes.

Remove the rubber band.

Project originally posted here on FamilyCorner.com
I've submitted this to Reinvented's Trash to Treasure

For a text only (no craft photos or commentary) printer friendly version of this craft project, click here